Please check detail safety precautions as follows:
1, Installation and adjustment must be carried out according to the Installation Manual. Careless in installation and adjustment will lead to such accidents as fire, electric shocks or fall off.
2, During the installation never allow the pedestrians to pass through the automatic door or approach the work site. Because any tools or parts falling off during the installation will cause injury to the pedestrians.
3, Never remodel the parts, otherwise fire, electric shocks or fall will occur.
4, Never use the power beyond the stipulated voltage or frequency, otherwise fire
or electric shocks will occur.
5, The sensor should be set and adjusted to make sure that the opening area of the door will fully fall into the range of sensor detection without any blind area. If the detecting range is too small or having blind area , the pedestrians will be collided or squeezed by the door, causing injury.
6, Do fix up photocell to ensure the detecting range for the walking area of the door leaf, otherwise the pedestrians will be collided or squeezed by the door leaf, causing injury.
Before install your automatic sliding door operator, you must clear all the safety precaution. Installation of automatic door should be entrusted to the appointed distributer or professional installation personnel, otherwise it may be dangerous.